X-Scooter Accessories
- Short or Long Body
- Nickel Metal Hydride (NiMH) or Lithium Ion (Li-Ion) batteries
- Navigation (Compass) Mounts
- Tow Harness
- External Integrated Camera (X-View)
- Standard Camera/Light Mount
- Deluxe Camera Mounts
- Travel Cases
Add a long body and additional battery to increase the run time. The total weight of the scooter with long body and additional battery is 25kgs.
The x-scooter is provided with a NiMH battery as standard. This can be upgraded to a Li-Ion battery to increase the run time. Batteries cannot be mixed and matched. If you have a long body, both batteries must be NiMH or Li-Ion, they cannot be a combination of the two.
These come as either single or double mounts. They can be used to attach bottom timers or compasses to your x-scooter.
The tow harness is used in situations where the diver doesn't have a crotch strap with scooter tow ring. This harness ensures that the diver is not towed through the water by their arms.
This upgrade will convert your X-Scooter into a CSI X-Scooter, building in the X-View camera. This is a specially designed low light hi resolution externally mounted camera which can video automatically, and requires no additional lighting. The camera is then connected inside the X-Scooter body to a compatible recording device, such as a video camera with RCA input or Archos or other recording device.
Low profile, lightweight, universal mounting system for cameras or lights. It can be attached with a camband to any X-Scooter which makes it quick and easy to remove/replace.
The Deluxe mount allows the mounted camera to swivel. The camera base plate is attached to the unit using an easy to turn lockdown screw. This allows the camera to be removed and replaced underwater, even with drygloves.
Moulded, wheeled hard case with foam inserts. This will fit a standard short body X-Scooter. Comes with a lifetime guarantee.
Dimensions: L - 28", W - 22", D - 15". Weight without foam: 10kgs
Lightweight, wheeled, soft travel case (X-Pack) made from Nylon. It has a retractable pull handle and laser cut foam to fit standard X-Scooter Sierra.
Dimensions: L - 28", W - 22", D - 15". Weight with X-Scooter and battery: 23kgs
X-Scooter Spares
X-Shorts
1mm stretch neoprene shorts with attached bellows pockets. These are designed to be worn over the top of wetsuits as an alternative to gluing on permanent pockets, or can be worn on their own if the water is warm enough. They have a waist cord to adjust the fit. Come in sizes S, M, L and XL.
Mask Strap
Mask strap to replace your existing strap. Made out of neoprene and webbing, so it will not break like rubber straps and it won't tangle hair.